Cans:
Watering Cans
Special features - large, off-set opening to simplify filling, a long drip-resistant spout, water-level indicator. Clay colored high impact plastic. The 2 gallon can has an adjustable rosette providing a steady stream or a gentle spray.
| |
|
Humidity Trays:
Gro-Pro Humidity Tray with Grid
Heavy-Duty plastic grid-covered trays in either White or Black.
A Product Discount of 20% is available when purchasing 10 or more of One Size.
Want a better picture?
| |
|
High Drain Trays with Cover Domes
Mesh-bottomed, heavy-gauge plastic trays with clear dome covers. Great for seedlings and propagation.
A Product Discount of 20% is available when purchasing 10 or more of One Size.
Want a better picture?
| |
|
Humidi-Grow Humidity Trays
All trays are 21/4 in. High. Fill them halfway with water and the moisture from it's evaporation will assist in keeping your plants healthy and fresh!
FYI = Ordering 3 or more of either Tray #104 or #105 entitles you to a free Tray Stand (#St10) (not pictured) These will be automatically included with your order.
A Product Discount of 20% is available when purchasing 10 or more. You may Mix & Match Sizes. ...just keep selecting and adding any combination of these to your cart and when the qty reaches 10 or more - Presto! 20% off!
Want a better picture?
| |
|
Plant Furniture™ Easy-Drain Humidity Tray
The 26 in. long x 12 in. wide by 2.5 in. deep tray is made from an injection-molded UV resistant polymer. The tray comes with 9 easily removable lacquered wood slats. Plants sit on the slats and excess water collects in the tray below. As the water evaporates, it provides humidity helping indoor plants stay healthy. An innovative drainage system lets you remove excess water by pulling on the brass knob and extending the 12 in. reinforced hose to quickly drain the tray.
Advantages:- The attractive wood slats increase the water capacity of the tray. Deep ridges molded into tray bottom keeps water below the pots even when the tray is used without the slats
- Trays are stackable with the wood slats removed
- A high quality reinforced hose is used along with solid brass fittings
- No more carrying plants to the sink to water, or spilling full humidity trays
- The tray has built in anti-scratch pads to protect furniture
- The high grade UV resistant polymer can handle long-term exposure to direct sunlight
- The ergonomic design is easy to carry and strong enough to support and carry plants without warping or bending
A Product Discount of 20% is available when purchasing 6 or more of One Size.
| |
|
Plant Furniture™ Grow and Show Humidity Tray
The solid, 26 in. Long x 12 in. Wide x 2 1/2 in. Deep, wood frame (available in black lacquer or maple finished hardwood) surrounds an injection-molded polypropylene tray topped with removable lacquered wood slats. Grow and Show Humidity Trays are ideal because excess water may be removed quickly and easily using our unique retractable drainage hose system.
A Product Discount of 20% is available when purchasing 6 or more of One Size.
Learn more about it here.
| |
|
Water Breakers:
Fogg-It Nozzle
Attaches to the end of your watering hose to break the water into a mist-like rain. Available in two strengths.
| |
|
Plastic Body Dramm 170
Attaches to the end of your watering hose/wand to break the water into a soft rain. Similar to the photo, but with a plastic side-wall and metal faceplate.
| |
|
Watering Sprayers:
Bottle-top Sprayer
Economical sprayer screws onto any 2 liter Coca-Cola type bottle. (bottle not included)
| |
|
Sprayers
These are real high quality pump-type units that allow spraying without having to continuously squeeze the trigger.
| |
|
Watering Wands & Parts:
Ball Valve
An on/off valve for water flow control. Impact resistant plastic. 1 1/4 in.
| |
|
Extension Handle with Shut-Off
Now you can reach everywhere... 16 in. Aluminum handle with plastic grip and quarter-turn shut off. Threaded end to accept a water breaker of your choice.(breaker not included)
| |
|
Fogg-It Thumb Valve
An on/off squeeze -trigger valve for water flow control. Chrome finish.
| |
|
Garden-Coil Deluxe
Garden Coil Indoor/Outdoor watering wand, with adjustable spray! Hooks up to standard garden hose or garden hose faucets. Adapter to fit most indoor faucets included. Now opens to reach 50ft!
| |
|
Wonder Waterer
Highest Quality Nozzle with hose connector for watering. The Wonder Waterer emits a very uniform & soft water pattern. Removable/replaceable faceplate for easy cleaning.
Replacement Parts Listed Here too.
| |
|
Miscellaneous:
Hozon Proportioner / Mixer
The "Hozon" is a mixer that is attached between your watering hose and the faucet. A separate suction tube is then dropped into a bucket of Fertilizer solution. When watering, this is then drawn in & diluted and then applied right along with your watering.
| |
|
Waterfall Components:
Submersible Mini-Jet Pump
Same Pump as used with Ebb & Flow unit ...and in waterfalls. Adjustable speeds.
Want a better picture?
| |
|
Ultrasonic Mist-Maker / Fogger
Mini fogger for an area up to 3 X 4'. Fully submersible. Requires a Large-size Resin Container if to be used with one of our existing waterfalls. Optional umbrella (listed below) is included with each fogger.
Want a better picture?
| |
|
Ultrasonic Mist-Maker / Fogger Dimmer
Use this Dimmer Control to vary the output quantity. Runs on low voltage.
| |
|
Ultrasonic Mist-Maker / Fogger Umbrella
When placed over the Fogger Unit, this Umbrella-like canopy will help eliminate spatters.
| |
|
Miscellaneous:
Ebb Flow System
Fully Self-Contained Units! Excellent for Phragmipediums and others that prefer to stay moist. Pump and all fittings included!
Want a better picture?
| |
|
KK Ebb Flow System
NEW - Fully Self-Contained Units! Tray size 36 in. x 22 in.
Tub 18 gallon (save on shipping and get one yourself locally - see pricing options below.)
Excellent for Phragmipediums and many other orchids that prefer to stay moist.
New Large Size!
Want to see more details?
| |
|
Humidity:
Aquafog® Hydro SS 700™
The new Aquafog® Hydro SS 700™ brings advanced fine-mist fogging to relaxed atmosphere applications. They are quiet, dependable and perfectly suited for the smaller job. The Hanging Sump unit is essentially a Bench Top unit with an extra bracket for hanging. If you are seeking the benefits of the Bench Top but would like ability to hang the unit as an option, then the Hanging Sump is the ticket. Hanging Sump units, reuse its condensation waste water, eliminating the need of a nearby drain and are easy to operate. Units fill automatically by means of an internal float valve and come equipped with a simple garden hose connection. A quarter-turn valve controls the fogging output. Perfectly suited for growing orchids, no matter whether the collection houses a few or if you have a greenhouse/sunroom/growing room full of them!
If you need fine misty-fog combined with mild air propulsion for either evaporative cooling or mid-range humidification applications, the Aquafog® Hydro SS 700™ may be just the ticket. Ready to install, these stand-alone units connect easily to ordinary water supply or may be used as self-contained (hanging sump).
- 3 gallons/hr output!
- Not recommended for humidification applications above 80% RH.
- Call or Email us for accessory Humidistats.
Check out the details here!
| |
|
Miscellaneous:
Momet™ Moisture Meter
Take the guess work out of when to water your orchids and other plants. Over-watering orchids/plants is the main reason why they fail to thrive.  The MOMET is a tool to help growers understand when their plants need watering.
The MOMET can be used to test individual orchids and/or plant mixes. It is also a useful tool to sample test a few plants in a large growing area to determine watering requirements for the overall range.
When inserted into the potting mix, one of the LED lights will turn GREEN for wet, RED for dry and YELLOW for approaching dryness.
A slide switch on the back lets you specify the reading for bark mixes, moss or soil. Comes with two AAA batteries and a watering guide.
| |
|
